GENESIALLUMINIO

GENESI ALLUMINIO

GENESI ALLUMINIO professional spray gun, the next evolution of the classic Genesi Topline, thoughtfully crafted with a super-lightweight and ultra-smooth aluminum body. Experience the pinnacle of professional high-performance painting with unmatched comfort.

Utilizing HALO Technology, which stands for High Atomisation Low Overspray, this innovative transfer efficiency system achieves superior results by combining higher pressure than the standard HVLP with an equal or even higher level of transfer efficiency. This exceptional performance streamlines the application process, enhancing both speed and ease.

GENESI ALLUMINIO has undergone rigorous testing at UDRI laboratories and has received certification compliance from California SCQAMD, affirming its reliability and adherence to standards.

ALLUMINIO - SELECT OPTIONS

CLEAR

GENESI ALLUMINIO CLEAR
Crafted with perfection in mind, this cutting-edge tool is tailored for the flawless application of MS, HS and UHS clear coats. Its ingenious Italian engineering guarantees a uniform and consistent paint distribution across the entire spray pattern, ensuring a seamless finish every time. With an ergonomic and lightweight design, it offers unparalleled operator comfort during extended use. Additionally, the control surfaces and knobs are thoughtfully designed to provide precise adjustments even when wearing gloves, allowing for effortless customisation and ease of use.

Recommended setup size for automotive 1K and 2K clear coats can vary based on the product, application technique, and manufacturer recommendations.

Automotive CLEAR COAT spray guns typically use a nozzle size that ranges from around 1.2mm to 1.3mm. The choice of nozzle size depends on the viscosity (thickness) of the clear coat being sprayed and the desired application technique. In recent times many coating manufactures are recommending 1.2 over 1.3 which they say reduces m

(1.2mm - 1.3mm): are commonly used for 1K and 2K clear coats to ensure proper atomisation and coverage of the clear coat material. This helps achieving a smooth and glossy finish with minimal orange peel texture.

In recent times there has been a shift away from the popular 1.3mm to 1.2mm for clear coats by many paint manufacturers. This change reflects advancements in paint formulation, application techniques, and the desire to achieve specific finish qualities. Several factors contribute to this change:

Improved Formulations: Modern clear coat formulations have evolved to provide better flow, leveling, and self-leveling properties. This allows for smoother and more even finishes with finer atomisation, which can be effectively achieved with a slightly smaller nozzle size like 1.2mm.
Reduced Orange Peel: A smaller nozzle size can help minimize orange peel texture, resulting in a smoother and more high-gloss finish. This aligns with the industry's push for achieving showroom-quality finishes.
Improved Atomisation & Transfer Efficiency: The widespread adoption of new technolgies like Walcoms HALO Technology, High Atomisation Low Overspray technology has led to better atomisation and reduced overspray. Smaller nozzle sizes complement HALO and HVLP systems, as they can provide better atomisation without excessive material wastage.
Environmental Concerns: Paint manufacturers are striving to reduce material waste and overspray, contributing to more environmentally friendly practices. Smaller nozzle sizes can help achieve this by delivering the appropriate amount of material precisely where needed.
Efficiency and Cost: Smaller nozzle sizes can potentially lead to better material utilisation, as they allow for more controlled application. This can translate to cost savings by reducing the amount of paint used per application.
Adaptation to New Trends: As the automotive industry and customer preferences evolve, there's a demand for smoother and more refined finishes. Smaller nozzle sizes can help achieve these modern finish expectations.

It's important to note that while 1.2mm is now a common recommendation, individual manufacturer formulations and specific requirements can still lead to variations in recommended nozzle sizes. Always refer to the manufacturer's guidelines and technical data sheets for the specific clear coat product you are using to ensure you achieve the best results.

CLEAR - OPTIONS

BASE

GENESI ALLUMINIO BASE was crafted for unparalleled application of waterborne and solvent-based paints, this state-of-the-art gun with HALO technology boasts an exceptional ability to achieve ultra-fine atomisation, resulting in the utmost precision in color reproduction, pigment dispersion and alignment. Its unparalleled design ensures uniform and consistent paint distribution across the entire spray pattern, while the soft-edged spray pattern enables effortless blending of color basecoats.

The recommended setup size for base coat spray guns can vary depending on factors such as the type of base coat being used, the intended application, and the manufacturer's guidelines.

Automotive Base Coat spray guns typically use a nozzle size that ranges from around 1.2mm to 1.3mm. However other set-up sizes are used in various applications, including industrial coatings, where different requirements and materials may call for a different approach. Below are some examples of Set-up (nozzle size) selections used in different contexts:

Set Up Size (1.2mm - 1.3mm): Most common sizes and are often used for spraying waterborne, solvent and low-viscosity base coat paints. They provide finer atomisation and are suitable for achieving smoother and more even color coverage. These sizes are also preferred and recommended for candy, metallic and pearl finishes, as they help prevent overloading the surface with paint particles, which can lead to unevenness, mottling or streaking.
Set Up Size (1.0mm - 1.1mm): typically used for finer applications and specialised painting tasks that require precision and detail. Applications where these set-upe sizes might be used: Fine Detail Work, Touch-Ups and Spot Repairs, Graphics and Artwork, Models, Electronics and other small components.
Set Up Size (1.4mm - 2.5mm): Industrial coatings, heavy coatings, corrosion-resistant coatings, industrial flooring coatings, high-volume applications. Larger size allows for thicker coatings, faster coverage, and accommodates specialized requirements.

It's important to note that the choice of nozzle size in industrial coatings is influenced by factors such as the viscosity and composition of the coating material, the desired film thickness, the substrate being coated, and the specific requirements of the application. Always refer to the manufacturer's guidelines and technical data sheets for the specific coating material being used to determine the appropriate nozzle size and other application parameters.

BASE - OPTIONS

HVLP

GENESI ALLUMINIO HVLP Designed to meet the demands of discerning HVLP painters, this impeccably crafted HVLP spray gun excels in applying waterborne and solvent-based base coats and clear coats with remarkable precision and efficiency.

HVLP - OPTIONS

BODY

Laser etched black anodized "anticorodal" aluminium body. Lightweight, easy to handle and comfortable in the hand.

ANTICORODIL ALUMINIUM

Anodised "anticorodal" aluminium allows for more precise machining giving precise atomisation and very light.

Al REGULATOR

High precision anodised antocordial aluminim air pressure regulator with anologue gauge

ALLUMINIO - BUY NOW